© Tim Fisher Installing a wireless and begins with unpacking all of the equipment from the box. If you purchased this as part of a rebate program, be sure to keep the UPC from the box. Your product box will probably contain the following items: • Wireless keyboard • Wireless mouse • Wireless receiver(s) • Batteries (if not, you may have to supply these) • Software (usually on a CD) • Manufacturer instructions If you are missing anything, contact either the retailer where you purchased the equipment or the manufacturer.
Different products have different requirements so check the included instructions if you have them. © Tim Fisher Since the and you're installing are wireless, they won't receive power from the computer like wired keyboards and mice do, which is why they require batteries. Turn the keyboard and mouse over and remove the battery compartment covers. Insert new batteries in the directions shown (match + with the + on the battery and vice versa). Place the keyboard and mouse wherever comfortable on your desk.
Download the latest drivers for your HP Wireless Mouse to keep your Computer up-to-date.
Please keep in mind when deciding where to position your new equipment. Making the correct decision now can help prevent carpal tunnel syndrome and tendonitis in the future.
Note: If you have an existing keyboard and mouse that you're using during this setup process, just move them elsewhere on your desk until this setup is complete. © Tim Fisher The wireless receiver is the component that physically connects to your computer and picks up the wireless signals from your and, allowing it to communicate with your system.
Note: Some setups will have two wireless receivers - one for the keyboard and the other for the mouse but the setup instructions will otherwise be the same. While the specific requirements vary from brand to brand, there are two considerations to keep in mind when choosing where to position the receiver: • Distance from Interference: Keep the receiver at least 8 inches (20 cm) away from sources of interference such as the computer and computer and other items that may cause interference such as fans, fluorescent lights, metal filing cabinets, etc. • Distance from Keyboard and Mouse: The receiver should be positioned somewhere between 8 inches (20 cm) and 6 feet (1.8 m) from the keyboard and mouse. Important: Do not connect the receiver to the computer quite yet. This is a future step when installing the wireless keyboard and mouse. © Tim Fisher Almost all new hardware has accompanying software that must be installed. This software contains that tell the on the computer how to work with the new hardware.
The software provided for wireless and differ greatly between manufacturers so check with the instructions included with your purchase for specifics. Generally, though, all installation software is fairly straightforward: • Insert the disc into the drive. Barr And Stroud Binoculars Serial Numbers.
The installation software should start automatically. • Read the on-screen instructions. If you're not sure how to answer some questions during the setup process, accepting the default suggestions are a safe bet. Note: If you do not have an existing mouse or keyboard or they are not functioning, this step should be your last one. Software is nearly impossible to install without a working keyboard and mouse! © Tim Fisher Finally, with your computer turned on, plug the connector at the end of the receiver into a free USB port on the back (or front if need be) of your computer.